spec no: dsak2997 rev no: v.1 date: dec/29/2009 page: 1 of 7 approved: wynec checked: allen liu drawn: f.f.zhou 2.2x1.4mm surface mount led lamp attention observe precautions for handling electrostatic discharge sensitive devices AA2214VR4D1S series features z 2.2mm x 1.4mm, 1.3mm high. z low power consumption. z available on tape and reel. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. description the source color devices are made with ingan light emit- ting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications.
spec no: dsak2997 rev no: v.1 date: dec/29/2009 page: 2 of 7 approved: wynec checked: allen liu drawn: f.f.zhou handling precautions compare to epoxy encapsulant that is hard and brittle, si licone is softer and flexible. although its characteristic significantly reduces thermal stress, it is more su sceptible to damage by external mechanical force. as a result, special handling precau tions need to be observed during asse mbly using silicone encapsulated led products. failure to comply might leads to damage and premature failure of the led. 1. handle the component along the side surfaces by using forceps or appropriate tools. 2. do not directly touch or handle the silicone lens surface. it may damage the internal circuitry. 3. do not stack together assembled pcbs containing ex posed leds. impact may scratch the silicone lens or damage the internal circuitry. 4. the outer diameter of the smd pickup nozzle should not exceed t he size of the led to prevent air leaks. the inner diameter of the nozzle should be as large as possible. 5. a pliable material is suggested for the nozzle tip to avoid scratching or damaging the led surface during pickup. 6. the dimensions of the component must be accurately progra mmed in the pick-and-place machine to insure precise pickup and avoid damage during production.
spec no: dsak2997 rev no: v.1 date: dec/29/2009 page: 3 of 7 approved: wynec checked: allen liu drawn: f.f.zhou selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. max. min. typ. 2 1/2 AA2214VR4D1S-c1 cool white water clear 5310k 6000k 7040k 900 1300 120 AA2214VR4D1S-n1 neutral white water clear 3710k 4000k 4260k 650 1200 120 AA2214VR4D1S-w2 warm white water clear 2870k 3000k 3220k 650 1100 120 cct range erp 1201005923 1201005921 1201005922 absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c symbol parameter typ. max. units test conditions v f [1] forward voltage 3.3 4.0 v i f =20ma i r reverse current 10 ua v r = 5v c capacitance 100 pf v f =0v;f=1mhz note: 1. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. parameter cool white / neutral white / warm white units power dissipation 120 mw dc forward current 30 ma peak forward current [1] 100 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsak2997 rev no: v.1 date: dec/29/2009 page: 4 of 7 approved: wynec checked: allen liu drawn: f.f.zhou
spec no: dsak2997 rev no: v.1 date: dec/29/2009 page: 5 of 7 approved: wynec checked: allen liu drawn: f.f.zhou 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 x y 2500 k 3000 k 4000 k 5000 k 6000 k 7000 k 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 w1 w2 w3 n1 n2 c1 x y x y x y x y 1 0.4582 0.4099 8 0.4147 0.3814 15 0.3702 0.3722 0.3481 0.3557 0.4687 0.4289 0.4221 0.3984 0.3736 0.3874 0.3370 0.3472 0.4813 0.4319 0.4342 0.4028 0.3869 0.3958 0.3364 0.3328 0.4700 0.4126 0.4259 0.3853 0.3825 0.3798 0.3466 0.3411 2 0.4483 0.3919 9 0.4080 0.3916 16 0.3670 0.3578 23 0.3376 0.3616 0.4582 0.4099 0.4146 0.4089 0.3702 0.3722 0.3260 0.3512 0.4700 0.4126 0.4299 0.4165 0.3825 0.3798 0.3265 0.3371 0.4593 0.3944 0.4221 0.3984 0.3783 0.3646 0.3370 0.3472 3 0.4465 0.4071 10 0.4017 0.3751 17 0.3736 0.3874 24 0.3370 0.3472 0.4562 0.4260 0.4080 0.3916 0.3616 0.3788 0.3265 0.3371 0.4687 0.4289 0.4221 0.3984 0.3592 0.3641 0.3270 0.3230 0.4582 0.4099 0.4147 0.3814 0.3703 0.3726 0.3364 0.3328 4 0.4373 0.3893 11 0.3941 0.3848 18 0.3703 0.3726 25 0.3260 0.3512 0.4465 0.4071 0.3996 0.4015 0.3592 0.3641 0.3144 0.3408 0.4582 0.4099 0.4146 0.4089 0.3568 0.3495 0.3160 0.3274 0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3265 0.3371 5 0.4342 0.4028 12 0.3889 0.3690 19 0.3616 0.3788 26 0.3265 0.3371 0.4430 0.4212 0.3941 0.3848 0.3496 0.3702 0.3160 0.3274 0.4562 0.4260 0.4080 0.3916 0.3481 0.3557 0.3175 0.3139 0.4465 0.4071 0.4017 0.3751 0.3592 0.3641 0.3270 0.3230 6 0.4259 0.3853 13 0.3825 0.3798 20 0.3592 0.3641 27 0.3144 0.3408 0.4342 0.4028 0.3869 0.3958 0.3481 0.3557 0.3028 0.3304 0.4465 0.4071 0.4006 0.4044 0.3466 0.3411 0.3055 0.3177 0.4373 0.3893 0.3950 0.3875 0.3568 0.3495 0.3160 0.3274 7 0.4221 0.3984 14 0.3783 0.3646 21 0.3496 0.3702 28 0.3160 0.3274 0.4299 0.4165 0.3825 0.3798 0.3376 0.3616 0.3055 0.3177 0.4430 0.4212 0.3950 0.3875 0.3370 0.3472 0.3081 0.3049 0.4342 0.4028 0.3898 0.3716 0.3481 0.3557 0.3175 0.3139 22 cct 2500-7000 k bin code color group chromaticity regions cct (k) min. typ. max. warm white w1 1, 2, 3, 4 2580 2700 2870 w2 5, 6, 7, 8 2870 3000 3220 w3 9, 10, 11, 12 3220 3500 3710 n1 13, 14, 15, 16 3710 4000 4260 n2 17, 18, 19, 20, 21, 22 4260 4700 5310 cool white c1 23, 24, 25, 26, 27, 28 5310 6000 7040 neutral white notes: shipment may contain more than one chromaticity regions.orders for single chromaticity region are generally not accepted. measurement tolerance of the chromaticity coordinates is 0.01.
spec no: dsak2997 rev no: v.1 date: dec/29/2009 page: 6 of 7 approved: wynec checked: allen liu drawn: f.f.zhou reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) tape dimensions (units : mm) reel dimension
spec no: dsak2997 rev no: v.1 date: dec/29/2009 page: 7 of 7 approved: wynec checked: allen liu drawn: f.f.zhou packing & label specifications AA2214VR4D1S series
|
